Vetus M2.06 Wartungshandbuch PDF herunterladen (Seite 20)

Starting

Now turn the key further to the ‘start’

position.

Release the key as soon as the engine

fires (the key will return to the ‘oN’ posi-

tion) and throttle back.

Leave the key in this position while the

engine is running.

Check that the indicator lights for oil pres-

sure and alternator are off. Cooling water

should now flow out of the exhaust; if this

is not the case, stop the engine immedi-

ately. Before submitting the engine to full

load it should be brought up to operating

temperature as quickly as possible by

running at 3/4 of maximum revs. Never

turn the main switch off while the engine

is running.

The instrument panel is provided with the

following instruments (Depending of the

type of panel, see page 10).

Use

Starting

WarNiNg

Release the key if the engine does

not fire within 10 seconds. Wait until

the starter motor has stopped running

completely before turning the key to

the ‘start’ position again. Never allow

the starter motor to run for more than

30 seconds consecutively.

VD00109

VD00110

WarNiNg

Never turn the key to the ‘start’ posi-

tion while the engine is running.

Doing so will damage the starter

motor.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Keine Kommentare

Vetus M2.06 Wartungshandbuch Seite 20